BMW ICOM

2014 New BMW ICOM A2+B+C with software (newest version) 2014 New BMW ICOM A2+B+C Diagnostic and Programming Tool without Software,BMW ICOM A2+B+C support BMW cars till 2013 year. Support BMW and MINI full system diagnose and offline programming. ICOM A2+B+C HardwaVersion: 1.32 ICOM 2 ICOM-PF-CORE 3.10.42 ICOM-Boot: 01.20.00 ICOM-Application: 01.33.00 It supports hardware update later. ICOM A2+B+C Function: A2- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols B – diagnostic via MOST bus, and have connection to A-interface via USB connection. C – 20-pin cable for old models. Addtion: The 2014 version BMW ICOM A2+B+C is more stronger than 2013.12 version. 2013.12 Super Version BMW ICOM A2+B+C 2013.12 Super Version BMW ICOM A2+B+C Diagnostic and Programming Tool with Software Hardware and Software Perfectly Match; Fast running speed; Fully-new Serial Numbers (S/N), work stably;Powerful engineer software. Support multi-language. 2013 Super Version BMW ...

Using BMW ICOM A2+b+c to program BMW F-Series chassis models * Programming Control Unit * Set Code Control unit Control unit measures can be selected as follows: * Click on the control unit under the tab “Control Unit Tree” * Under the “TAB Edit Control unit”, either by direct selection or by clicking on the control unit. Menu “Programming” To execute the vehicle programming/setting code, do the following: * Use ista/p to read vehicle data. After you create a new dialog, display the tips for “dialog preparation” * Follow the tips, record when necessary, confirm button “OK” Show the dialog box “whether the control unit has been replaced” * Confirm button “No”, exceptions see “replace (update) control unit” Establish a connection with the vehicle: The vehicle details are displayed after the specified associated environment has been successfully identified. Displayed under Menu “Programming”.